ALARIS PUMP INFUSION SETS

BD Alaris 2420-0007 (2420-007)

Alaris Pump Module Set — Check Valve, 2 SmartSite Y-Sites, 20 Drop, 117″

Primary administration set for the BD Alaris Pump Module. Check valve, roller clamp, and two SmartSite needle-free Y-sites (typically ~83″ and ~6″ from the 2-piece male luer lock; one above and one below the pumping segment). Universal spike. Not made with DEHP. Can be used on the pump or as gravity.

• Drip factor: 20 drops/mL
• Approximate length: 117″ (297 cm)
• Approximate priming volume: 25 mL
• Ports: 2 SmartSite needle-free valves
• Filter: none
• Typical pack: 20/case

For use with Alaris Pump Module. Use only compatible Alaris pump sets.

BD Alaris 2426-0007 (2426-007)

Alaris Pump Module Set — Check Valve, 3 SmartSite Y-Sites, 20 Drop, 126″

Primary set with an extra needle-free access point for multi-line or secondary meds. Check valve, roller and/or slide clamp, three SmartSite Y-sites (commonly ~95″, ~75″, and ~6″ from the 2-piece male luer lock). Universal spike. Not made with DEHP.

• Drip factor: 20 drops/mL
• Approximate length: 126–127″ (320–322 cm)
• Approximate priming volume: 26 mL
• Ports: 3 SmartSite needle-free valves
• Filter: none
• Typical pack: 20/case

For use with Alaris Pump Module / gravity per IFU.

BD Alaris 11171447

Alaris Pump Module Set — 2 Back Check Valves, 3 SmartSite Y-Sites, 20 Drop, 126″

Primary set with two back check valves and three SmartSite needle-free Y-sites. Extra check-valve protection for multi-access setups. Roller / slide / pinch clamp configuration. 2-piece male luer lock. Not made with DEHP.

• Drip factor: 20 drops/mL
• Approximate length: 126″ (~319 cm)
• Approximate priming volume: 27 mL
• Ports: 3 SmartSite Y-sites
• Back check valves: 2
• Filter: none
• Typical pack: 20/case

For use with Alaris Pump Module.

BD Alaris 10015896

Alaris Pump Module Set — Check Valve, 2 Ganged 4-Way Stopcocks, 3 SmartSite Valves

Higher-access set for complex infusions. Check valve, roller clamp, two slide clamps, two ganged 4-way stopcocks, two male luers, and three SmartSite needle-free valves. Built for multiple lines / stopcock control at the bedside.

• Typical pack: 10/case
• Ports: 3 SmartSite needle-free valves
• Stopcocks: 2 ganged 4-way
• Clamps: roller + 2 slide
• For use with Alaris Pump Module

Confirm exact length, drop factor, and priming volume on the current lot label at order.

BD Alaris 2423-0007 (2423-007)

Alaris Pump Module Set — 2 Ganged 4-Way Stopcocks, 4 SmartSite Y-Sites, 10 Drop, 136″

Full-featured primary set: back check valve, roller clamp, two slide clamps, two ganged 4-way stopcocks (off indicator), two male luers, and four SmartSite Y-sites at approximately 6″, 46″, 83″, and 116″ from the 2-piece male luer lock (1 above pumping segment, 3 below). 10 drop/mL.

• Drip factor: 10 drops/mL
• Approximate length: 136″
• Approximate priming volume: 28–29 mL
• Ports: 4 SmartSite Y-sites
• Stopcocks: 2 ganged 4-way
• Typical pack: 10/case

For use with Alaris Pump Module. Suited to multi-line / OR-style setups that need stopcock control.

Additional information:

• For use with BD Alaris Pump Module (8100) or gravity as directed in the set IFU
• Integrated safety clamp fitment to help prevent accidental free flow
• SmartSite needle-free access (where listed)
• Sterile fluid path; single-use
• Not made with DEHP (standard -0007 configurations)